Close
Do you have any questions? Contact us!
I agree to the Terms of Service
BACK

KitchenAid Refrigerator Repair Austin | Reliable Local Service

Fast, same-day KitchenAid refrigerator repair in Austin and surrounding areas. We specialize in fixing premium KitchenAid issues like clicking noises, cooling failures, and leaking ice makers. Our expert technicians use only genuine KitchenAid OEM parts to ensure your high-end fridge runs efficiently for years. Enjoy honest pricing, no upselling, and a solid 5-month warranty on all repairs.
🕒 Get a Quote in 10 Mins
Book online 📅
🛡️ 5-Month Warranty
🤝 Honest Pricing
✅ Certified Technicians
📍 Local Austin Experts
🛠️ $0 Service Call with Repair

KITCHENAID REFRIGERATOR REPAIR: SOLVING NO ICE PRODUCTION ISSUES

KITCHENAID REFRIGERATOR REPAIR: FIXING CLICKING NOISES & COOLING ISSUES

A customer in Austin noticed their high-end KitchenAid refrigerator was no longer cooling and heard a faint "clicking" sound every few minutes. Upon inspection, we found the compressor was trying to start but failing because of a burnt-out Start Relay. This is a critical component that helps the compressor reach the necessary speed to begin the cooling cycle.
The Solution To protect the premium compressor and restore perfect temperatures:
  1. Diagnostic: Tested the compressor terminals for resistance and confirmed the failed relay kit.
  2. Genuine Parts: Installed a new original KitchenAid OEM Start Relay and Capacitor. We always use OEM parts to ensure the high-efficiency compressor is protected from electrical spikes.
  3. Maintenance: Performed a deep cleaning of the condenser coils. For KitchenAid units, this is vital to reduce heat load on the new relay and improve overall energy efficiency.
  4. Verification: Monitored the internal system to ensure the compressor started immediately and reached target temperatures (37°F/0°F) within hours.
The Result The refrigerator is whisper-quiet once again, and the cooling performance is fully restored. The customer’s groceries are safe, and the repair is fully covered by our 5-month warranty.

KITCHENAID REFRIGERATOR REPAIR: FIXING INVERTER CONTROL & FAN MOTOR FAILURES

The refrigerator was making a loud grinding and vibrating noise during operation that could be heard from other rooms. The customer in Austin reported that the sound was constant and the cooling performance had started to drop. Upon inspection, we found a double failure: the Evaporator Fan Motor inside the fridge was wobbling due to worn bearings, and the Condenser Fan Motor near the compressor was obstructed by heavy dust buildup. These fans are crucial for moving cold air and cooling the compressor; when they fail, the fridge becomes noisy and risks overheating the inverter board.
The Solution To eliminate the noise and protect the high-end cooling system, we performed a full overhaul:
  1. Dual Replacement: Installed two brand-new genuine KitchenAid OEM fan motors—one for the internal cooling system and one for the external condenser unit. We always use original factory fans to ensure whisper-quiet operation and correct RPM.
  2. Cleaning: While the unit was open, we deep-cleaned the condenser coils. For KitchenAid appliances, dust buildup is often the root cause of fan failure, as it forces the motor to work harder and run hotter.
  3. Vibration Dampening: We checked all mounting grommets and tightened the fan shrouds to ensure 100% silent, vibration-free performance.
The Result The loud noise is completely gone. The refrigerator is now whisper-quiet, and the cooling system is running at peak efficiency. Our repair is backed by a 5-month warranty, giving the customer peace of mind.

KITCHENAID REFRIGERATOR REPAIR: FROZEN EVAPORATOR & FAN NOISE FIX

The customer in Austin reported a loud "hitting" or "grinding" noise coming from the freezer, followed by the refrigerator completely losing its cooling ability. Upon inspection, we found the evaporator coils were completely iced over, causing the evaporator fan blade to strike the ice buildup. This blockage prevented cold air from circulating to the fresh food compartment, risking the safety of the stored groceries.
The Solution To restore proper cooling and stop the noise, we executed a full system recovery:
  1. Manual Defrost: Carefully melted the excessive ice buildup using professional steam equipment to avoid damaging the delicate evaporator fins or the premium KitchenAid plastic liner.
  2. Component Testing: Tested the defrost heater, thermistor, and defrost timer/control board to identify why the automatic defrost cycle failed.
  3. Part Replacement: Replaced the faulty defrost component with a genuine KitchenAid OEM part to ensure long-term reliability and precise sensor readings.
  4. Fan Inspection: Cleared the ice from the fan shroud and verified the fan motor was still balanced and operational after the impact.
The Result The loud noise is gone, and the refrigerator reached its target temperature of 37°F within hours. The unit is back to peak performance, and the repair is backed by our 5-month warranty.

KITCHENAID REFRIGERATOR REPAIR: FIXING WATER LINE AIR LEAK & ICE BOX BUILDUP

A common issue for KitchenAid owners in Austin is ice forming inside the ice maker box or around the housing. In this case, the water fill tube at the top of the refrigerator was leaking air due to a faulty seal. This "air infiltration" caused moisture to freeze instantly, creating an ice bridge that blocked the fill tube and caused water to overflow, freezing the entire ice maker compartment solid.
The Solution To permanently fix the air leak and restore ice production, we performed:
  1. System Thaw: Used professional steam to safely clear the frozen water line and remove the ice block from the ice maker housing without damaging the KitchenAid internal components.
  2. Tube Replacement & Custom Sealing: Installed a new water fill tube and applied a high-grade silicone sealant to the inlet. This ensures a 100% airtight seal, preventing warm air from entering and causing future ice buildup.
  3. Valve Inspection: Checked the water inlet valve for slow "weeping" leaks that could contribute to the freezing.
  4. Airflow Verification: Confirmed the ice maker fan was circulating air correctly after the defrosting process.
The Result The ice maker box is now dry and airtight. The unit is back to producing fresh ice cubes. This specialized repair, including our custom sealing method, is backed by a 5-month warranty.
A customer in Austin reported their premium KitchenAid refrigerator had completely stopped making ice. While the water dispenser continued to work, the ice tray remained empty for days. Our diagnostic revealed the Ice Maker Module had suffered a mechanical timing failure, and the internal heating element—responsible for releasing the frozen cubes into the bin—had burnt out.
The Solution To restore the convenience of fresh ice to this KitchenAid unit:
  1. Diagnostic: Verified power flow to the module and performed a manual harvest cycle test, which confirmed the motor and heater failure.
  2. Replacement: Installed a new genuine KitchenAid OEM Ice Maker Assembly. We replace the entire module to ensure all gears, sensors, and electrical contacts are factory-fresh and reliable.
  3. Water Line Service: Inspected the water fill tube for any ice blockages (a common issue in Austin's humidity) and verified the water inlet valve pressure.
  4. Verification: Initiated a forced cycle to ensure the new module correctly filled with water and began the freezing process.
The Result The ice maker began producing fresh cubes immediately. Within 24 hours, the bin was full, and the unit operates silently. This premium repair is fully covered by our 5-month warranty.

KITCHENAID REFRIGERATOR REPAIR: FIXING CLOGGED DEFROST DRAIN & ICE BUILDUP

The root cause was a clogged Defrost Drain Line. The customer in Austin noticed water leaking onto the kitchen floor and a thick layer of ice sheet forming at the bottom of the freezer compartment. When the drain is blocked by debris or a frozen "ice plug," the condensation from the defrost cycle has nowhere to go, causing it to overflow into the freezer floor and eventually leak outside.
The Solution To prevent future leaks and ensure proper moisture removal, we performed the following:
  1. Steam Defrost: Used professional steam equipment to safely melt the ice sheet and clear the drain trough without damaging the KitchenAid's premium plastic liner.
  2. Drain Flushing: Flushed the drain line with a specialized solution to remove any algae, mold, or debris that caused the initial clog.
  3. Valve Modification: Inspected the "duckbill" drain valve at the back of the unit. We cleaned it and made necessary adjustments to ensure it stays open, allowing water to exit freely to the evaporator pan.
  4. Final Test: Poured hot water through the system to verify the drain is 100% clear and the water reaches the drain pan as intended.
The Result The water leak is completely resolved, and the freezer floor is now dry and clear of ice. The KitchenAid refrigerator is operating at peak efficiency, and the customer is protected by our 5-month warranty.

Professional Appliance Repair Across Greater Austin

We provide fast, same-day repair services for all major washing machine brands throughout the Austin metropolitan area and surrounding cities. Our technicians are always nearby, ensuring your appliances are back in service without delay.
  • Austin (All Neighborhoods)
  • Round Rock
  • Cedar Park
  • Pflugerville
  • Georgetown
  • Leander
  • Lakeway
  • Bee Cave
  • Hutto
  • Buda & Kyle
  • Manor
  • West Lake Hills

Heating element went out in our dryer. Uniqpro technician Dimitri was wonderful. He also found that white thing in the middle was very worn. He gave the entire dryer a checkup! He replaced the white thing at cost of the part. Very clean, affordable, professional. Fast response with accurate quote.

We will be calling Dimitri again.

I’ve got respond in 10 min after I post my order and the tech was in my house next day. He gave me very detailed evaluation what should be repair for very reasonable price, without upselling! He fixed ice maker in my Samsung fridge, replaced a water filter and in addition for the same price cleaned vacuumed condenser coil, fan, etc.

GREAT 5 STAR SERVICE! Thank you.

  • Nick M.

Dmitri helped us with very short notice. He efficiently and expertly repaired our Asko washing machine. I was expecting to wait weeks to get in with a certified Asko repair person however he was very familiar with Asko and better than anyone we have. He is smart, knowledgeable and very kind.His price was extremely fair, almost too little for what the work he did.

Highly recommend!

I plan on using Dimitri whenever I need an appliance repair moving forward. He's an experienced and very sweet young man who is starting his own repair business and he responded quickly to my Yelp inquiry. He was at my home within 2 hours to replace the faulty oven ignition in my 5 year old Samsung range. He was in and out in just an hour, and again he was very kind and his pricing was very reasonable. Thanks Dimitri!

Real Feedback from Real Customers
info@uniqproappliance.com
Business address: 9417 Great Hills, Austin,TX, 78759
+1 (737) 500-1555
Uniqpro Appliance Repair Llc © 2026
Made on
Tilda