Close
Do you have any questions? Contact us!
I agree to the Terms of Service
BACK

GE Washing Machine Repair Austin | Reliable Local Service

Fast, same-day GE washer repair in Austin and surrounding areas. We specialize in fixing common GE issues like filling problems, drainage errors, and loud spin cycles. Our expert technicians use only genuine OEM parts to ensure your appliance lasts. Enjoy honest pricing, no upselling, and a solid 5-month warranty on all GE repairs
🕒 Get a Quote in 10 Mins
Book online 📅
🛡️ 5-Month Warranty
🤝 Honest Pricing
✅ Certified Technicians
📍 Local Austin Experts
🛠️ $0 Service Call with Repair

GE WASHER REPAIR: FIXING DRAIN & PUMP ISSUES

GE WASHER REPAIR: INVERTER CONTROL BOARD REPLACEMENT

The GE washer was powered on and the display was active, but the drum failed to rotate during any cycle. After selecting a program, the machine would simply sit silent without any mechanical movement. Upon diagnostic testing of the motor drive system, we identified that the Inverter Control Board (IPM) had failed, preventing the necessary power from reaching the motor to begin the agitation or spin process.
The Solution To restore full motor functionality and drum rotation, our technician performed the following:
  1. System Diagnostic: We verified the DC voltage from the main control board to the inverter to ensure the communication path was clear. This confirmed that the motor was healthy but the power delivery was interrupted by the faulty board.
  2. Board Replacement: We installed a brand-new genuine GE OEM Inverter Control Board. Using original GE parts is vital to ensure the complex electronic timing of the motor remains in sync.
  3. Software Calibration: Once installed, we performed a factory recalibration to ensure the new board accurately monitors the drum's RPM and load weight.
The Result The drum now spins perfectly at all speeds, and the machine has returned to its high-efficiency operation. The GE washer is once again whisper-quiet, and the repair is backed by our 5-month warranty for our client in Austin

GE FRONT-LOAD WASHER: FIXING SHORTED CONTROL BOARD & DOOR LATCH

A customer in Austin faced a major failure with their GE Front-Load washer. The unit suddenly went dead mid-cycle, and a faint electrical odor was detected. Our deep diagnostic revealed a "chain reaction" failure: the door latch assembly suffered a high-voltage short circuit, which instantly backfed and fried the communication circuit on the Main Electronic Control Board (PCB). In this state, the washer was completely unresponsive and safety-locked.
The Solution To safely bring this premium appliance back to life:
  1. Diagnostic: Traced the electrical path and confirmed that the short originated in the latch's wax motor, causing visible burn marks on the control board's power relay.
  2. Dual Replacement: Installed a new GE OEM Control Board and a new GE OEM Door Latch. It is critical to replace both; installing a new board with the old shorted latch would immediately destroy the new board.
  3. Harness Safety Check: Thoroughly inspected the entire wiring harness between the door and the board to ensure no wires were melted or compromised.
  4. System Recalibration: Programmed the new board and performed a factory test cycle to verify the door locks securely and the motor engages without electrical spikes.
The Result The washer is now fully restored and operating safely. By diagnosing the root cause, we prevented a repeat failure and saved the machine from the landfill. This complex repair is backed by our 5-month warranty.

GE WASHER REPAIR IN AUSTIN: FIXING WATER LEAKS & INLET VALVE FAILURE

A homeowner in Austin contacted us with a common but frustrating problem: their GE washer was filling with water even when the machine was turned off. This "ghost filling" can lead to unexpected flooding and wasted water if not addressed quickly.
After a thorough inspection, our technician identified the culprit: a faulty water inlet valve. Over time, these valves can fail to close completely due to mineral buildup or internal wear, allowing water to trickle into the drum 24/7.
The Solution
To restore the efficiency and safety of this GE washing machine:
  1. Diagnostic: We confirmed that water was entering the tub while the unit was unplugged, pinpointing a mechanical failure in the inlet valve rather than an electronic error.
  2. OEM Valve Replacement: The old, leaking part was removed and replaced with a brand-new original GE water valve. Using OEM (Original Equipment Manufacturer) parts ensures a perfect fit and long-term reliability against Austin’s water pressure.
  3. System Flush & Seal Check: We cleared the supply lines and verified that the new valve seals perfectly under pressure.
  4. Final Testing: We ran a complete test cycle to ensure the water levels were accurate and, more importantly, that the flow stopped completely once the cycle ended.
The Result
The washer is back to perfect working order. The drum stays dry when not in use, and the customer no longer has to worry about potential leaks. This professional repair is backed by our 5-month warranty on both parts and labor.

GE WASHER REPAIR IN AUSTIN: FIXING INTERNAL WATER LEAKS

A customer in Austin noticed that water was slowly dripping into the drum of their GE washing machine even when it wasn't running. This constant leaking can lead to mold issues and high water bills. After a quick inspection, our technician confirmed that the water was bypassing the internal seals due to a worn-out component.
The root cause was a faulty water inlet valve. These valves are designed to shut off the water flow completely, but when the internal diaphragms fail, they allow water to "weep" into the tub 24/7.
The Solution
To stop the leak and protect the customer's home:
  1. Diagnostic: We manually inspected the valve ports and confirmed that water was trickling through the cold water side while the machine was powered off.
  2. Valve Replacement: We removed the defective assembly and installed a brand-new original GE water inlet valve. Using OEM parts is crucial for GE washers to handle local Austin water pressure without future leaks.
  3. Seal & Connection Check: We inspected the supply hoses and tightened all internal connections to ensure a 100% watertight seal.
  4. Performance Test: We ran a short cycle to verify the new valve opens and closes precisely, stopping the flow instantly when required.
The root cause was a clogged Drain Pump Motor which led to a Control Board (PCB) short circuit. A blockage in the internal filter caused the pump to overheat and draw excessive current, ultimately damaging the drain circuit relay on the main control board. This left the tub full of standing water and triggered a persistent "Drain Error" that wouldn't clear even after a reset.
The Solution To ensure long-term reliability and restore full communication between components, we performed the following steps:
  1. Emergency Drainage: Manually drained the unit and cleared all obstructions from the pump housing, debris filter, and internal hoses.
  2. Part Replacement: Installed a brand-new original GE drain pump and a new OEM Main Electronic Control Board. Replacing both was necessary to prevent the damaged board from potentially shorting the new pump.
  3. Professional Installation: Carefully programmed the new control board to match the specific model's software version and secured all wiring harnesses.
  4. Full Test: Ran a specialized diagnostic cycle to confirm the board now correctly signals the pump and all water is removed within the required timeframe.
The Result The washer now drains perfectly every time. The machine is fully operational with a responsive interface, and the customer in Austin is back to their normal routine with a repair backed by our 5-month warranty.

Professional Appliance Repair Across Greater Austin

We provide fast, same-day repair services for all major washing machine brands throughout the Austin metropolitan area and surrounding cities. Our technicians are always nearby, ensuring your appliances are back in service without delay.
  • Austin (All Neighborhoods)
  • Round Rock
  • Cedar Park
  • Pflugerville
  • Georgetown
  • Leander
  • Lakeway
  • Bee Cave
  • Hutto
  • Buda & Kyle
  • Manor
  • West Lake Hills

Heating element went out in our dryer. Uniqpro technician Dimitri was wonderful. He also found that white thing in the middle was very worn. He gave the entire dryer a checkup! He replaced the white thing at cost of the part. Very clean, affordable, professional. Fast response with accurate quote.

We will be calling Dimitri again.

I’ve got respond in 10 min after I post my order and the tech was in my house next day. He gave me very detailed evaluation what should be repair for very reasonable price, without upselling! He fixed ice maker in my Samsung fridge, replaced a water filter and in addition for the same price cleaned vacuumed condenser coil, fan, etc.

GREAT 5 STAR SERVICE! Thank you.

  • Nick M.

Dmitri helped us with very short notice. He efficiently and expertly repaired our Asko washing machine. I was expecting to wait weeks to get in with a certified Asko repair person however he was very familiar with Asko and better than anyone we have. He is smart, knowledgeable and very kind.His price was extremely fair, almost too little for what the work he did.

Highly recommend!

I plan on using Dimitri whenever I need an appliance repair moving forward. He's an experienced and very sweet young man who is starting his own repair business and he responded quickly to my Yelp inquiry. He was at my home within 2 hours to replace the faulty oven ignition in my 5 year old Samsung range. He was in and out in just an hour, and again he was very kind and his pricing was very reasonable. Thanks Dimitri!

Real Feedback from Real Customers
info@uniqproappliance.com
Business address: 9417 Great Hills, Austin,TX, 78759
+1 (737) 500-1555
Uniqpro Appliance Repair Llc © 2026
Made on
Tilda